Xerox Phaser 3100MFP/X - Manual (Page 76)

Phaser 3100MFP/X
- 71 -
12 - PC Features
Fax parameters
Access to fax parameters
1 Click on the icon of the window MF
D IRECTOR .
2 Select T OOLS > O PTION > F AX .
3 Make the adjustments required, referring to the
description of parameters below and click OK.
Description of the tab L OGS AND R EPORTS
Description of the tab F AX P ARAMETERS
Option Description
Automatic printing
of a received
document
The fax is automatically printed
when received.
Printing of a inbox
report A report is printed out for each
fax received.
Printing of inbox log
The log is printed automatically
when its contents fill a page.
Automatic printing
of a sent document The fax is automatically printed
when it is sent.
Printing of an
outbox report An outbox report is printed after
each fax is sent.
Printing of the
outbox log The log is printed automatically
when its contents fill a page.
Option Description
Transmission
speed Fax default transmission
speed.
Line number
Number of the line where your
machine is connected.
Dialling prefix
This dialling prefix will be
automatically inserted in front
of the number before sending
on this line.
Type of dialing
Must be programmed
according to the type of
switchboard your machine is
connected to.
Header
Displays a Communication
Identification Line (CIL) on the
documents you send or on the
documents you receive.
ECM
Corrects communication errors
due to line disturbance. This
option ensures that received
documents are legible. On the
other hand, communication
times may be longer if the line
is bad.
Number of attempts
Number of attempts the
machine must make if send
fails to contact a recipient.
Interval between
attempts Duration between two send
attempts.