Xerox Phaser 3100MFP/X - Manual (Page 24)

Phaser 3100MFP/X
- 19 -
2 - Installation
Packaging contents
The packaging contains the items listed below:
Multifunction device
1 print cartridge
1 Safety guide and 1 Installation guide
1 PC installation CD ROM and 1 OCR PC software CD
ROM
(depending on model)
1 power cord
1 telephone cord (only North America)
1 USB cord
Device installation
1 Unpack the device.
2 Install the device adhering to the security notices
stated at the beginning of this booklet.
3 Remove all tape from the machine.
4 Remove the plastic protection film from the screen.
Installing the document feeder
1 Secure the document feeder by fitting the two clips
(B) in the notches (A) provided for this purpose.
Paper tray installation
Your machine supports a number of sizes and types of
media (refer to Specifications, page 83).
1 Remove the paper tray completely.
Important
Before loading paper, refer to the
paragraph Paper
recommendations, page 15.
Important
You can use paper weighing
between 60 and 105 g/m2.