Xerox Phaser 3100MFP/X - Manual (Page 29)

Phaser 3100MFP/X
- 24 -
3 - Co
py
Copy
Your machine has the ability to make one or more copies.
You can also set up several parameters in order to make
copies at your will.
Simple copy
In this case, the default parameters are applied.
1 Place the document to be copied face up in the
automatic document feeder.
or
Place the document face down on the document
glass, aligned with the registration arrows near the
top left of the document glass.
2 Press the button twice. The copy is made
using the default parameters.
ECO mode copy
The ECO mode enables you to reduce the amount of
toner consumed on the page so as to save your printing
costs.
When the ECO mode is used, the toner consumption is
reduced and the print density becomes lighter.
1 Place the document to be copied face up in the
automatic document feeder.
or
Place the document face down on the document
glass, aligned with the registration arrows near the
top left of the document glass.
2 Press the button.
3 Press the button.
Advanced copying
Advanced copy allows the user to do custom setups for
the current copy job.
1 Place the document to be copied face up in the
automatic document feeder.
or
Place the document face down on the document
glass, aligned with the registration arrows near the
top left of the document glass.
2 Press the button.
3 Enter the number of copies that you want and
confirm with the OK button.
4 Choose the paper tray AUTOMATIC or MANUAL
with the buttons or , then confirm with the OK
button.
5 Choose with the buttons or the printing option
(see examples below) depending on the copy
mode that you want:
- n-Up (document feeder): 1 Page onto 1,
2 Pages onto 1, or 4 Pages onto 1.
- Poster mode (document glass): 1 Page to 1,
1 Page to 4 or 1 page to 9.
Confirm with the OK button.
Note
You can start copy by pressing the
button at any time in below
steps.
Note
After step 1, you can directly enter the
number of copies with the numerical
keypad and press the OK button to
confirm. Then refer to step 4.