Xerox Phaser 3100MFP/X - Manual (Page 31)

Phaser 3100MFP/X
- 26 -
3 - Co
py
according to the following table:
3 Confirm your choice by pressing the OK button.
4 Exit this menu by pressing the button.
Zoom setup
The ZOOM parameter allows you to reduce or enlarge an
area of a document by choosing the origin and the zoom
level to apply to the document, from 25 to 400 %.
842 - ADVANCED FCT/COPY/ZOOMING
1 Press , enter 842 using the keypad.
2 Enter the desired zoom level with the
alphanumerical keypad or choose among
predefined values with the buttons and .
3 Confirm your choice by pressing the OK button.
4 Exit this menu by pressing the button.
Collated copy setup
The COLLATED parameter gives you the option of
having your output collated or uncollated.
843 - ADVANCED FCT/COPY/COLLATED
1 Press , enter 843 using the keypad.
2 Select the desired option with the buttons and
according to the following table:
3 Confirm your choice by pressing the OK button.
4 Exit this menu by pressing the button.
Scanned original setup
If you want, you can change the origin of the scanner.
By entering new values for X and Y in mm (X < 209 and
Y < 280), you move the scanned area as shown on the
diagram below.
844 - ADVANCED FCT/COPY/ORIGIN
1 Press , enter 844 using the keypad.
2 Select the X and Y coordinates with the buttons
or .
3 Setup the desired coordinates with the numerical
keypad or the buttons and .
4 Confirm your choice by pressing the OK button.
5 Exit this menu by pressing the button.
Contrast setup
The CONTRAST parameter allows you to choose your
output’s contrast.
845 - ADVANCED FCT/COPY/CONTRAST
1 Press , enter 845 using the keypad.
2 Setup the desired level of contrast with the buttons
and .
3 Confirm your choice by pressing the OK button.
4 Exit this menu by pressing the button.
Brightness setup
The BRIGHTNESS parameter allows you to lighten or
darken your output.
846 - ADVANCED FCT/COPY/BRIGHTNESS
1 Press , enter 846 using the keypad.
2 Setup the desired brightness with the buttons
and .
3 Confirm your choice by pressing the OK button.
4 Exit this menu by pressing the button.
Parameter Description Icon
AUTO Low resolution. none
TEXT
Standard resolution for
documents containing text and
graphics.
PHOTO
Optimal resolution for
documents containing
photographies.
QUALITY
TEXT Optimal resolution for
documents containing text.
Note
You can also change the resolution by
pressing the button.
Parameter Description
COLLATED
The printer assembles the copies of
the original document.
E.g.: Select collated for output
stacked in sets to match the
sequence of the originals, i.e. (1,2,3/
1,2,3).
UNCOLLATED
The printer does not assemble the
copies of the original document.
E.g.: Select uncollated for output
sorted into stacks of individual
pages, i.e. (1,1,1/2,2,2/3,3,3).