Watlow Electric Integrated Controller User Manual Rev C EZ-ZONE PM - Manual (Page 46)

Wa t l o w E Z - Z O N E ® P M I n t e g r a t e d C o n t r o l l e r • 4 4 • C h a p t e r 6 S e t u p P a g e
Dis-
play
Parameter Name
Description
Set-
tings
Range Default Appears If
[iP;F3]
[ip.F3] Communications 2
IP Fixed Address Part 3
Set the IP address of this controller. Each
device on the network must have a unique
address.
0 to 255 1 IP Address Mode is set
to Fixed
[iP;F4]
[ip.F4] Communications 2
IP Fixed Address Part 4
Set the IP address of this controller. Each
device on the network must have a unique
address.
0 to 255 1 IP Address Mode is set
to Fixed
[iP;S1]
[ip.S1] Communications 2
IP Fixed Subnet Part 1
Set the IP subnet mask for this controller.
0 to 255 255 IP Address Mode is set
to Fixed
[iP;S2]
[ip.S2] Communications 2
IP Fixed Subnet Part 2
Set the IP subnet mask for this controller.
0 to 255 255 IP Address Mode is set
to Fixed
[iP;S3]
[ip.S1] Communications 2
IP Fixed Subnet Part 3
Set the IP subnet mask for this controller.
0 to 255 0 IP Address Mode is set
to Fixed
[iP;S4]
[ip.S4] Communications 2
IP Fixed Subnet Part 4
Set the IP subnet mask for this controller.
0 to 255 0 IP Address Mode is set
to Fixed
[iP;g1]
[ip.g1] Communications 2
IP Fixed Gateway Part 1
Set the IP gateway address for this con-
troller.
0 to 255 0 IP Address Mode is set
to Fixed
[iP;g2]
[ip.g2] Communications 2
IP Fixed Gateway Part 2
Set the IP gateway address for this con-
troller.
0 to 255 0 IP Address Mode is set
to Fixed
[iP;g3]
[ip.g3] Communications 2
IP Fixed Gateway Part 3
Set the IP gateway address for this con-
troller.
0 to 255 0 IP Address Mode is set
to Fixed
[iP;g4]
[ip.g4] Communications 2
IP Fixed Gateway Part 4
Set the IP gateway address for this con-
troller.
0 to 255 0 IP Address Mode is set
to Fixed
[Mb;E]
[Mb.E] Communications 2
Modbus TCP Enable
Activate Modbus TCP.
[``no] No
[`YES} Yes Yes the controller includes
Modbus TCP (PM6 _ _ _
_-3AA _ A _ _).
[EiP;E]
[EiP.E] Communications 2
EtherNet/IP™ Enable
Activate EtherNet/IP™.
[``no] No
[`YES} Yes Yes the controller includes
EtherNet/IP (PM6 _ _ _
_-3AA _ A _ _).
Note: Some values will be rounded off to fit in the four-character display. Full values can be read with other interfaces.
If there is only one instance of a menu, no submenus will appear.