Watlow Electric Single and Dual Loop Controller Series PD - Manual

High Performance
Temperature and
Process Controller
with Web Server and
EtherNet/IP™
Watlow’s SERIES PD controllers utilize embedded Ethernet
technology to provide a convenient, economical means for
setting up and viewing key process variables such as temper-
ature, pressure and humidity. The units also integrate control
of these variables with programmable logic controllers (PLC)
and other automation solutions. Available in single or dual
loop versions, the DIN-rail mounted SERIES PD controllers
offer up to four control/alarm outputs plus up to two
digital/current transformer inputs.
These controllers are ideally suited for a wide range of
temperature and process controller applications where the
operator interface is supported from a remote location or the
temperature and process control must be integrated with
other automation equipment including PLCs. For remote
operation, the SERIES PD serves web pages supporting
key functions including operation, alarm monitoring and
configuration directly to standard web browsers. The SERIES
PD can also generate e-mail messages for remote alarm
notification. Support for EtherNet/IP™, Modbus™ TCP and
PCCC protocols ensure robust and easy to implement
solutions for machine integration with a variety of automation
vendor’s products.
The SERIES PD controller is backed by a three-year
warranty and is UL
® 508, C-UL ® , CSA and CE approved.
SERIES PD SINGLE AND DUAL LOOP CONTROLLER
1241 Bundy Boulevard
Winona, Minnesota 55987-5580 USA
Phone: +1 (507) 454-5300
Fax: +1 (507) 452-4507
Internet: www.watlow.com
e-mail: [email protected]
WIN-PD-1005
Features and Benefits
EtherNet/IP™ with explicit and implicit messages
• Reads or sets any control parameter from a PLC
• Moves data quickly and efficiently to ensure the best
process performance
• Easily obtains and sets the attributes critical to your
process with static and dynamic message assemblies
PCCC protocol messages
• Integrates with older Allen-Bradley PLCs that support
Ethernet but not EtherNet/IP™
Modbus™ TCP protocol for Ethernet communications
• Connects to Watlow’s WATVIEW software and other
HMI software
• Integrates with third-party solutions
© 2005 Watlow Electric Manufacturing Company Printed in the USA on Recycled Paper, 15 Percent Postconsumer Waste
UL ® and C-UL ® are registered trademarks of Underwriter’s
Laboratories, Inc.
Windows
® is a registered trademark of the Microsoft Corporation.
Modbus ® is a registered trademark of AEG Schneider Automation.
EtherNet/IP™ is a trademark of ODVA.
Prec
ise
Tem
pera
ture
Con
trolle
r an
d
Ethe
rNet
/IP™
To be automatically connected to the nearest North American Technical and Sales Office call:
1-800-WATLOW2
International Technical and Sales Offices: Asia, +65 6773-9488 • Europe—France, +33 (01) 3073-2425 • Germany, +49 (0) 7253-9400-0 •
Italy, +39 (02) 458-8841 • Spain, +34 916 751 292 • Sweden, +46 31 7014959 • United Kingdom, +44 (0) 115-964-0777 •
Latin America, +52 (442) 217-6235
Features and Benefits (con’t)
Embedded web pages for setup, monitoring and trending
• Provide a convenient, easy-to-use operator interface
• Simplify process monitoring
• Make troubleshooting processes quick and easy
On-board data logging option
• Ensures vital data is retained
E-mail notification of alarms and events
• Minimizes downtime
DIN-rail, sub panel mounting
• Reduces time and cost of installation
• Prevents unauthorized access
Watlow INFOSENSE™ sensor technology
• Improves sensor accuracy by a minimum of 50 percent
Heater burn out detection
• Improves process yield