Tandberg Data T40 - Manual (Page 86)

78 Troubleshooting
Table 18. Troubleshooting Matrix Remote Management with Solution
Problem Solution
Remote Management
The unit does not respond on
the RMI Verify that the Ethernet cable is connected to the correct hub.
Verify the Ethernet settings via the front panel. See
Information about the Operator Interfaces for details.
Reboot the library by issuing a system reset. Wait at least 30
seconds for the RMI to initialize.
Power cycle the library by turning off and on the main power
switch on the rear of the library. Wait at least 30 seconds for
the RMI to initialize.
Contact your service representative.
Table 19. Troubleshooting Matrix Forgot Password with Solution
Problem Solution
Forgot Password
Forgot password on RMI The RMI password can be cleared from the front panel
interface.
Forgot password on FPI Contact technical support. See Getting More Information or
Help .