Tandberg Data T40 User Manual
Page 27
StorageLibrary Installation and User Guide
19
Note
If the self-diagnostics and the inventory sequence are successfully completed,
the green LED illuminates and the display returns to the home screen. The library
is now ready for further configuration and operation.
If a problem occurs during the power-on sequence, the StorageLibrary displays an error message on
the display. Refer to
Troubleshooting
to learn the procedures for resolving the problem.
Labeling Cartridges for the Barcode Reader
You must attach barcode labels to the cartridges if you want to use the barcode reader functionality in
the library.
Caution
You must use StorageLibrary-specific barcode labels to ensure reliable
functionality of the barcode reader.
Cartridge labels must be oriented on the cartridges as shown in the figure below with the locking
mechanism to the left.
Figure 13. Positioning of Barcode Label for LTO Cartridges