Toshiba F15 - Manual (Page 65)

65 Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 2.3
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its gold connector bar (on the side you insert into the
computer).
8 Remove the new memory module from its antistatic
packaging.
9 Holding the memory module by its edges so that the gold
connector bar faces the slot, fit the memory module into
the socket by matching the alignment notches.
10 Gently press down on the memory module connector
until the clips snap into place.
Do not force the memory module into position. The memory
module should be level when secured in place.
Sample inserting the memory module into the slot