Toshiba F15 - Manual (Page 159)

159 Exploring Your Options
Using the Bridge Media slot
5.375 x 8.375 ver 2.3
Do not touch the SD ™ connector (metal area). You could
expose the storage area to static electricity, which can destroy
data.
Do not remove an SD ™ Card while data is being written or read.
Even when the message “copying...” in the windows
disappears, writing to the card might still be in progress and
your data could be destroyed. Wait for the indicator light to go
out.
Removing an SD
™
Card
1 Right-click the Safely Remove Hardware icon on the
System tray. After the card is stopped, it is safe to remove.
2 Grasp the card and pull it straight out.
Inserting an xD-Picture Card
™
1 Turn the card so that the contacts (metal areas) are face down.
2 Push the card into the slot until it locks in place.
Sample inserting an xD-Picture Card