Toshiba PORT - Manual (Page 77)

77 Learning the Basics
Using a DVD drive
5.375 x 8.375 ver 2.4.0
To attach this drive to your computer, follow the instructions
in
“Using an optional external DVD-ROM drive” on
page 104 .
Inserting discs (CD or DVD)
To insert a disc into the drive:
1 Make sure the computer is turned on.
2 Make sure the drive-in-use indicator light is off.
3 Press the drive’s eject button.
The disc tray slides partially out of the drive (about 1
inch).
HINT: The drive won’t open if the computer’s power is off.
4 Grasp the tray and pull it fully open.
Drive tray fully extended
5 Hold the disc by its edges and check that it is free of dust.
If the disc is dusty, clean it as described in “Problems
with the DVD-ROM drive” on page 192 .
6 Place the disc carefully in the disc tray, label side up.