Toshiba PORT - Manual (Page 46)

46 Getting Started
Setting up your computer
5.375 x 8.375 ver 2.4.0
CAUTION: Static electricity can damage the memory module.
Before you handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to touch its
gold connector bar (on the side you insert into the computer).
8 Remove the new memory module from its antistatic
packaging.
9 Holding the memory module by its edges so that the gold
connector bar faces the slot, fit the module into the
socket.
10 Gently press down on the memory module connector
until the clips snap into place.
Do not force the module into position. The memory
module should be level when secured in place.
Inserting the memory module
CAUTION: Avoid touching the connectors on the memory module
or on the computer. Grease or dust on the connectors may cause
memory access problems.