Toshiba PORT - Manual (Page 44)

44 Getting Started
Setting up your computer
5.375 x 8.375 ver 2.4.0
Installing a memory module
Depending on your system’s configuration, the memory slot
may be occupied.
You need a standard Phillips no. 1 screwdriver to install a
memory module.
CAUTION: To avoid damaging the computer’s screws, use a
standard Phillips no. 1 screwdriver that is in good condition.
CAUTION: Do not install or remove a memory module while the
DVD-ROM drive power is on.
CAUTION: Installing a memory module with the computer’s power
on may damage the computer, the module, or both.
If the computer is on, begin at step 1; otherwise, skip to step
3.
1 If the computer is on, click Start, Turn Off Computer.
The Turn off computer window appears.
2 Click Turn Off.
The operating system turns off the computer.
3 Unplug and remove any cables connected to the
computer.
4 Remove the battery.
5 Close the display panel and turn the computer upside
down to locate the expansion memory cover to the
memory slot.