Turn off or shut down command, Restart command, Turn off or shut down command restart command – Toshiba PORT User Manual
Page 135
135
Enhancing Productivity
Powering down the computer
5.375 x 8.375 ver 2.4.0
❖
Restart, which restarts the computer
Each option has its advantages.
TECHNICAL NOTE: Before using any of these options to power
down your computer, save your files and make sure the disk
activity lights are off.
If you change your mind and decide to continue working after all,
wait a few seconds before turning the computer on again.
Turn Off or Shut down command
The Turn Off or Shut down commands power off the
computer. The Windows
®
XP Professional operating system
uses Turn Off if you are not connected to a Windows
®
network server (domain server). It uses Shut down if you are
connected to a Windows
®
network server (domain server).
Factors to consider when choosing Turn Off or Shut down:
❖
No power is used while the computer is turned off. This
is the most efficient mode if you will be away from your
computer for an extended time.
❖
Restarting from Turn Off or Shut down uses the most
time and battery power.
❖
When starting up again, the system does not
automatically open the programs and files you were
previously using.
Restart command
Restart is the same as Turn Off or Shut down but
automatically powers up the computer. Use it when you need
to reload the operating system, for example to activate
changes to system settings.