Going into hibernation mode – Toshiba PORT User Manual
Page 142
142
Enhancing Productivity
Using Hibernation
5.375 x 8.375 ver 2.4.0
The Set the range window appears.
Sample Set the range window with DC only option
8
Do one of the following:
❖
Click DC only if you want the settings to apply only
when you are using battery power.
❖
Click All for the settings to apply whether you are
using battery power or outlet power.
9
Click OK to close the Full Power Properties window.
10
Click the Hibernate tab, then click the Enable
hibernate support check box.
11
Click OK to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.
Going into Hibernation mode
If you are not connected to a Windows
®
network server
(domain server), power off the computer using the
Hibernation command as follows:
1
Click Start, Turn off computer.