Toshiba PORT - Manual (Page 115)

115 Expansion Options
Using an SD card
5.375 x 8.375 ver 2.4.0
Using an SD card
Your computer supports the use of an SD card. The card can
be used with a variety of digital products: digital music
players, cellular phones, PDAs, digital cameras, digital video
camcorders, etc.
CAUTION: Do not touch the SD connector. You could expose the
storage area to static electricity which can destroy data.
Do not remove an SD card while data is being written or read. Even
when the message “copying...” in the windows disappears, the
computer may be writing to the computer and your data could be
destroyed. Wait for the SD indicator light to go out.
Installing SD card drivers
During installation of the SD card drivers, one or more dialog
boxes may appear indicating that the driver is not digitally
signed. The message may appear as “Digital Signature not
found (About Secure Digital Emulation from Toshiba).”
Click Yes to continue.
Installing the SD card in the SD slot
To insert an SD card, turn the card so that the connector
(metal area) faces down then push the card in the slot until it
locks in place.
If the operating system does not recognize an inserted SD
card, remove and insert it again.
The green LED on the right side of the SD card slot will glow
when the card is being accessed.
CAUTION: If the SD card is not inserted into the slot correctly, any
data saved to the card may be lost.