Removing a memory module – Toshiba PORT User Manual
Page 47
47
Getting Started
Setting up your computer
5.375 x 8.375 ver 2.4.0
11
Replace the memory slot cover.
12
Replace the screw and tighten it.
13
Turn the computer over and reconnect any cables you
removed.
Removing a memory module
If you need to remove a memory module:
1
Complete steps 1–7 in “
“Installing a memory module” on
” to shut down the computer and expose the
memory module(s).
2
Pull the clips away from the memory module.
The memory module pops partially out of the slot.
Pulling the clips away from the memory module
3
Carefully remove the module from the slot.
4
Replace the memory slot cover and the screw.
5
Restart the computer.
This manual is related to the following products: