Toro 12 - Manual (Page 15)

Controller Setup
•
• Set Time Zone
• Set Auto Daylight Savings option
• Set Maximum Active Stations
• Select Stack or Overlap option
• Set Master Valve Type/Pump Start option
• Select Runtime Valve Test
• Set Maximum Backup ET
ADJUST DISPLAY CONTRAST
224
Set Controller Clock
• Adjust Display Contrast
9
About Controller Input
As you begin the controller setup procedures, you will find that
virtually all user-defined input is accomplished in the same
manner using the Function dial, Upper Line knob, and Lower
Line knob. For example, when you turn the Function dial to the
SETUP position, the first screen in the Setup menu will be
displayed. In this case, Adjust Display Contrast will be displayed
on the upper line and the default contrast value of 224 will be
displayed on the lower line.
The contrast value is underscorred and flashing, indicating that
it is selected and can be changed or edited by turning the Lower
Line knob. The information displayed on the screen when the
Upper Line knob or Function dial is turned in either direction,
enters the information into the controller memory.
Chapter 2
The SETUPfunction menu consists of 10 screens listed in
the following order: