Toshiba E-STUDIO230/280 - Manual (Page 96)

94
3.SETTING OF BASIC COPY MODES
3.SELECTING FINISHING MODES (Cont.)
3
Hole Punch Mode (Optional)
When the optional hole punch unit is attached to the finisher (Optional: MJ-1025), you can hole punch your
copies.
* The paper weight should be in the range of 64-200 g/m
2
. Special paper such as OHP files or labels is
excluded.
1 Place paper in the drawer(s).
- "4.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 61), be sure to specify the paper size.
2 Place the original(s).
- "1.SETTING ORIGINALS" Page 48
3 Press the Finisher button on the basic
menu as shown in the illustration on the
right (highlighted).
4 Press the [HOLE PUNCH] button.
z Select other copy modes as required.
5 Press the [START] button.
Available paper sizes for the hole punch:
Since the number of punch holes and the distance between the
holes vary depending on the country, purchase a hole punch unit
that meets your requirements. (For details, consult your service
technician.)