Toshiba E-STUDIO230/280 - Manual (Page 269)

267
12
7. Paper Misfeed in the Offset Tray Unit or Job Separator Unit (Optional)
1 Make sure that the bypass tray and the
automatic duplexer are open, then open
the transfer cover.
DO NOT touch the fuser unit and the metal area around it. Since
they are very hot, you could be burned or the shock could cause an
injury to your hand in the equipment.
2 Open the fuser unit cover.
3 Open the offset tray cover or job
separator cover.
4 Remove any misfed paper inside the
offset tray unit or job separator unit.
5 Close the offset tray cover or job
separator cover. Close the fuser unit
cover and the transfer cover. Return the
automatic duplexer and bypass tray to the
original positions.