Toshiba E-STUDIO230/280 - Manual (Page 274)

272
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
3.CLEAR PAPER SYMBOL (Cont.)
12
5 Rotate the knob in the lower right
clockwise.
- Remove any misfed paper in the paper exit area of the saddle
stitch unit.
6 Close the exit cover and the front cover,
and then return the finisher to the original
position.
13. Paper Misfeed in the Staple Unit
1 Open the front cover of the finisher.
2 Rotate the green knob in the middle
clockwise.
- When the staples are up, the window in the upper right of the knob
becomes blue.
3 Remove any misfed paper in the paper
exit area.
4 Close the front cover.