Toshiba E-STUDIO230/280 - Manual (Page 296)

294 14.SPECIFICATIONS & OPTIONS
14
1. e-STUDIO230/280 SPECIFICATIONS
Model Name DP-2320/2820
Type Desktop type
Original Glass Fixed
Printing (Copying) System Indirect electrophotographic method
Developing System 2-component magnetic brush developing
Fixing Method Halogen lamp (2 pieces)
Photosensor Type OPC
Original Scanning System Flat surface scanning system
(When the reversing automatic document feeder is installed: Fixed
scanning system by feeding the original)
Original Scanning Sensor Linear CCD sensor
Scanning Light Source Xenon lamp
Resolution Scanning 600 dpi x 600 dpi
Writing 2,400 dpi x 600 dpi (Smoothing process)
Acceptable Originals Sheets, books and 3-dimensional objects
Acceptable Original Size Max. A3
Acceptable
Copy Paper
Size Drawer A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R,
COMP, 13” LG, 8.5” SQ, 8K, 16K, 16K-R
Bypass Paper size within 100-297 mm (Length), 148-432 mm (Width)
Acceptable
Copy Paper
Weight Drawer
64-105 g/m 2
Bypass
64-209 g/m 2 (for continuous feed)
50-209 g/m
2
(for single feed)
64-105 g/m 2 (When the reversing automatic document feeder is used.)
Warm-up Time Approx. 25 seconds
First Copy Time Approx. 5.4 seconds
Continuous Copy Speed See “Continuous Copying Speed”.
Multiple Copying Up to 999 copies (digital key entry)
Excluded
Image Width Copy Leading edge: 3.0±2.0 mm, Trailing edge: 2.0±2.0 mm,
Both edge: 2.0±2.0 mm
Printer Leading edge: 5.0±2.0 mm, Trailing edge: 5.0±2.0 mm,
Both edge: 5.0±2.0 mm
Reproduction Ratio Actual size: 100±0.5%
Zoom: 25-400% (in 1% increments)
For the reversing document feeder 25-200% (in 1% increments)