beautypg.com

Single-staple finisher (mj-1022) – Toshiba E-STUDIO230/280 User Manual

Page 278

background image

276

12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL

4.ADDING STAPLES (OPTIONAL) (Cont.)

12

Single-staple Finisher (MJ-1022)

1

Pull the lever and move the finisher away
carefully from the equipment.

2

Take out the staple cartridge.

3

Remove the empty staple case from the
staple cartridge.

4

Set the new staple case.

- Push a new staple case into the staple cartridge until it clicks.
- Do not remove the seal holding the staples before the staple case

is set in the cartridge.

See also other documents in the category Toshiba Printers: