Toshiba E-STUDIO230/280 - Manual (Page 280)

278 12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH
12
5. REMOVING JAMMED STAPLES (OPTIONAL)
If copies have not been stapled in the staple mode, “Examine stapler” appears.
This shows that the staples are jammed. Remove them as described below.
Saddle-stitch Finisher (MJ-1025)
1 Open the front cover of the finisher.
2 Hold the green handle to pull out the
staple unit.
- Turn the upper green handle to position the mark shown in the
right-hand illustration so that the staple cartridge comes out
toward you.