Toshiba E-STUDIO230/280 User Manual

Page 215

213

1C6D

System error

Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your service representative.

1C70

SMTP client OFF

Ask your administrator to enable the SMTP
Client and perform the job again.

1C80

Internet Fax transmission failure when
processing E-mail job received

Confirm the “Received Internet Fax Forward”
settings.

1C81

Onramp Gateway transmission failure

Confirm the mail box settings.

1C82

Internet Fax transmission failure when
processing Fax job received

Confirm the “Received Fax Forward” setting.

1CC1

Power failure

Check if the power cable is connected
properly and it is inserted securely. Check if
the power voltage is unstable.

3A10-3A12

MIME format error

Ask the sender to resend the E-mail in the
MIME1.0 format.

3A20-22

E-mail process error

Ask the sender to resend the E-mail.

3A30

Partial E-mail timeout error

Ask the sender to resend the E-mail, or
change the Partial Wait time setting.

3A40

Invalid partial E-mail received

Ask the sender to resend the partial E-mail in
the RFC2046 format.

3A50-3A52

HDD full error

Ask the sender to resend the E-mail by
separating it to several E-mails. If this error
occurs because the paper empty occurs and
too much waiting jobs are stored in the hard
disc, add the paper to activate other jobs.

3A60-3A62

HDD full alert

3A70

Interrupt partial E-mail reception

Ask your administrator to enable the Enable
Partial E-mail setting and ask the sender to
resend the E-mail.

3A80-3A82

Partial E-mail disabled

Ask your administrator to enable the Enable
Partial E-mail setting and ask the sender to
resend the E-mail.

3B10-3B12

E-mail format error

Ask your administrator to enable the Enable
Partial E-mail setting and ask the sender to
resend the E-mail.

Error Code

Cause & Message

Corrective Action