Toshiba E-STUDIO230/280 - Manual (Page 220)

218
9.JOB STATUS
12.ERROR CODE (Cont.)
9
2B31 Failed to access Electronic Filing. Make sure that the specified e-Filing or folder
exists. (If not, this error would not occur.).
Delete the specified e-Filing or folder and
reset them. Retry the job in error. If the
specified e-Filing or folder cannot be deleted,
contact your service representative.
2B32 Failed to print Electronic Filing document. Make sure that the specified document exists.
(If not, this error would not occur.). Delete the
specified document. Retry the job in error. If
the specified document cannot be deleted,
contact your service representative.
2B50 Failed to process image. Turn the power OFF and then back ON. Retry
the scan. If the error still occurs, contact your
service representative.
2B51 Failed to process print image. Make sure that the Function List can be
printed out. Retry the print. If the error still
occurs, contact your service representative.
2B60 Duplicate error. Changed folder name
automatically. There is the same named folder in the
selected box. The system automatically
renames the folder.
2B70 Duplicate error. Changed document
name automatically. There is the same named document in the
selected box or folder. The system
automatically renames the document.
2B90 Insufficient Memory. Turn the power OFF and then back ON. Retry
the scan. If the error still occurs, contact your
service representative.
2BA0 Invalid Box password specified. Make sure that the password is correct and
retry the scan, or reset the password and retry
the scan. When this error occurs for the print
of the data in the e-Filing, perform the print
with the administrator's password. If the
recovery is still not completed or in case of
invalid password for the operation other than
printing (opening the file, etc.), contact your
service representative.
2BB0 Job canceled (Job was canceled by the user.)
2BB1 Power failure occurred Make sure that the power cable is connected
properly and it is inserted securely.
2BC0 System fatal error. Turn the power OFF and then back ON. Retry
the print. If the error still occurs, contact your
service representative.
Error Code Cause & Message Corrective Action