Toshiba E-STUDIO230/280 - Manual (Page 90)

88
3.SETTING OF BASIC COPY MODES
3.SELECTING FINISHING MODES (Cont.)
3
Rotate Sort Mode
In this copying mode, as sets of copies are output to the internal tray, the sets are alternated -lengthwise
and crosswise- on top of each other. (Optional drawer or Stack Feeder Bypass is required.) A4/A4-R, B5/
B5-R, LT/LT-R paper is available in this mode.
* This mode cannot be used in the Automatic Paper Selection mode.
1 Place paper in the drawer(s).
- "4.SETTING COPY PAPER" Page 36
2 Place the original(s).
- "1.SETTING ORIGINALS" Page 48
3 Press the Finisher button on the basic
menu as shown in the illustration on the
right (highlighted).
4 Press the [ROTATE SORT] button.
z Select other copy modes as required.
5 Press the [START] button.