Toshiba E-STUDIO230/280 - Manual (Page 271)

269
12
2 Open the upper cover of the finisher.
3 Remove any misfed paper in the finisher.
4 Close the upper cover.
10. Paper Misfeed in the Hole Punch Unit
1 Pressing the release lever of the finisher,
move the finisher carefully away from the
copier.
2 Rotate the green knob of the hole punch
unit to locate the arrow within the shadow
area in the right side of the knob.
- Under this condition, the punches are up.
3 Remove any misfed paper.
4 Return the finisher to the original
position.