Toshiba E-STUDIO230/280 - Manual (Page 245)

243
11
4. CHANGING INPUT DATA
The registered name, user name, password of template/user group can be changed.
Changing the Data of Template
1 Press the [TEMPLATE] button on the
control panel.
2 Press the [REGISTRATION] button
3 Select the group (in which the template
was registered) that you want to change,
and then press the [ENTER] button.
- Switch to the applicable menu using the [Prev] or the [Next]
button.
- To display the applicable menu immediately, key in the number of
desired user group.
4 When selecting the [PUBLIC TEMPLATE
GROUP] button, key in the “Admin
Password” (6 digits), and then press the
[ENTER] button. When selecting a user
group, key in the selected group’s
“Password” (5 digits), and then press the
[ENTER] button.
- If the password has not been set at the user group registration,
skip to step 5.