Toshiba E-STUDIO230/280 - Manual (Page 272)

270
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
3.CLEAR PAPER SYMBOL (Cont.)
12
11. Paper Misfeed in the Single-staple Finisher (optional: MJ-1022)
1 Pull the lever and move the finisher
carefully away from the copier.
2 Lift the green lever and remove any
misfed paper.
3 Remove any misfed paper in the paper
exit area.
4 Install the finisher to the equipment.
Be careful not to let your fingers be caught between the equipment
and the finisher (optional).
This could injure you.