Toshiba E-STUDIO230/280 User Manual
Toshiba Printers
Table of contents
Document Outline
- TABLE OF CONTENTS
- NOTICE TO USERS
- TOSHIBA QUALITY IS SECOND TO NONE
- PREFACE
- FEATURES OF THE e-STUDIO230/280
- GENERAL PRECAUTIONS
- DISCLAIMER NOTICE
- 1. BEFORE USING EQUIPMENT
- 1. DESCRIPTION OF EACH COMPONENT
- 2. TURNING ON THE POWER SWITCH
- 3. SWITCHING TO THE ENERGY-SAVING MODE
- 4. SETTING COPY PAPER
- 2. HOW TO MAKE COPIES
- 1. SETTING ORIGINALS
- 2. GENERAL COPYING PROCEDURES
- 3. AUTO JOB START (JOB PRESET)
- 4. INTERRUPT COPYING
- 5. STOPPING THE COPY OPERATION
- 6. BYPASS COPYING
- 3. SETTING OF BASIC COPY MODES
- 1. PAPER SELECTION
- 2. REDUCTION AND ENLARGEMENT COPYING
- 3. SELECTING FINISHING MODES
- 4. DUPLEX COPYING
- 5. ORIGINAL MODE
- 6. COPY DENSITY ADJUSTMENT
- 4. IMAGE EDITING AND IMAGE ADJUSTMENT
- 5. USING THE EDITING FUNCTIONS
- 1. IMAGE SHIFT
- 2. EDGE ERASE
- 3. BOOK CENTRE ERASE
- 4. DUAL-PAGE
- 5. 2 IN 1/4 IN 1
- 6. MAGAZINE SORT (FROM THE EDITING MENU)
- 7. IMAGE EDITING
- 8. X-Y ZOOM
- 9. COVER COPYING
- 10. SHEET INSERTION MODE
- 11. TIME & DATE STAMP
- 12. PAGE NUMBERING
- 13. JOB BUILD
- 14. DIRECTION OF COPY IMAGES IN “1 TO 2” AND “2 TO 1”
- 15. DIRECTION OF DUPLEX COPY IMAGES IN “2 TO 2”
- 16. CONTINUOUS/SINGLE ORIGINAL FEEDING
- 6. STORING ORIGINALS
- 7. SCANNING THE IMAGES
- 8. INTERNET FAX
- 9. JOB STATUS
- 10. e-FILING
- 11. TEMPLATE
- 12. WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
- 1. DESCRIPTION OF THE BLINKING GRAPHIC SYMBOLS
- 2. REPLACE TONER CARTRIDGE SYMBOL
- 3. CLEAR PAPER SYMBOL
- 1. Paper Misfeed in the Reversing Automatic Document Feeder (optional)
- 2. Paper Misfeed in the Drawer Feeding Area
- 3. Paper Misfeed in the Large Capacity Feeder (optional)
- 4. Paper Misfeed on the Bypass Feed Unit
- 5. Paper Misfeed in the Automatic Duplexer
- 6. Paper Misfeed in the Fuser Unit
- 7. Paper Misfeed in the Offset Tray Unit or Job Separator Unit (Optional)
- 8. Paper Misfeed in the Relay Unit (optional)
- 9. Paper Misfeed in the Finisher (optional: MJ-1025)
- 10. Paper Misfeed in the Hole Punch Unit
- 11. Paper Misfeed in the Single-staple Finisher (optional: MJ-1022)
- 12. Paper Misfeed in the Saddle-stitch Finisher (optional: MJ-1025)
- 13. Paper Misfeed in the Staple Unit
- 4. ADDING STAPLES (OPTIONAL)
- 5. REMOVING JAMMED STAPLES (OPTIONAL)
- 6. DISPOSING OF THE PUNCHED PAPER BITS (OPTIONAL)
- 7. CALL SERVICE SYMBOL/PERIODIC MAINTENANCE MESSAGE
- 13. MAINTENANCE
- 14. SPECIFICATIONS & OPTIONS
- INDEX