Toshiba E-STUDIO230/280 - Manual (Page 91)

89
3
Staple Sorting
When the finisher (optional) is installed, you can perform automatic stapling for every set. 3 staple positions
can be selected when installing the saddle-stitch finisher (MJ-1025).
* The paper weight should be in the range of 64-90 g/m
2
for the saddle-stitch finisher (MJ-1025) and 64-
80 g/m
2
for the single-staple finisher (MJ-1022). Special paper such as OHP films or labels is excluded.
* Stapling will not work when copied paper of different widths are mixed.
- Example of selecting the [FRONT STAPLE-1] button
Setting Staple Sort Mode
1 Place paper in the drawer(s).
- "4.SETTING COPY PAPER" Page 36
- When using this mode in bypass copying ("Bypass Copying"
Page 61), be sure to specify the paper size.
2 Place the original(s).
- "1.SETTING ORIGINALS" Page 48
3 Press the Finisher button on the basic
menu as shown in the illustration on the
right (highlighted).