Toshiba E-STUDIO230/280 - Manual (Page 47)

45
1
Clearing the Drawer for Special Uses
1 Press the drawer button corresponding to
the one which is set for the special use,
then press the corresponding button
(thick, insert, cover, etc.) on the bottom
line of the display.
- If you clear INSERT 1 when both INSERT 1 and INSERT 2 are
set, the drawer for INSERT 2 changes to INSERT 1.
- Each of the buttons toggles the associated drawer on/off.
- Replace the paper set in the drawer as required.
Setting Paper to the Large Capacity Feeder (Optional)
1 Pull out the large capacity feeder carefully
until it comes to a stop.