Telex Integrated Signal Processor ISP-100 User Manual
Page 99
8-29
Processing Components - Filter
Filter
Figure 8-14 Filter component.
Filters (see Figure 8-14) are used to modify the spectral balance,
frequency content, or phase response of the signals upon which they
operate.
Filter Bands
The filters in the ISP-100 are arranged in bands, each of which
represent a single 2nd-order filter in the DSP code. Each band can
be configured as one of seventeen different filter types:
LowPass Filter, 6 dB/octave
LowPass Filter, 12 dB/octave*
HighPass Filter, 6 dB/octave
HighPass Filter, 12 dB/octave*
LowShelf Filter, 6 dB/octave
LowShelf Filter, 12 dB/octave
HighShelf Filter, 6 dB/octave
HighShelf Filter, 12 dB/octave
Notch Filter
Parametric EQ Filter
Peaked HighPass Filter
AllPass Filter, 1st-order
AllPass Filter, 2nd-order
* More filters available in the Crossover filters.
The filter component
can be used to
implement custom
crossovers.