beautypg.com

Physical, Power – Telex Integrated Signal Processor ISP-100 User Manual

Page 42

background image

4-10

10 July 1998

Notes

 1

Per Analog Devices AD1890 data sheet, where applicable.

 2

With 6.144 MHz MCLK/2 input.

 3

20 Hz to 20 kHz, full-scale input, through sample rate converter, to output via passthrough.

 4

From input, through sample rate converter, to output via passthrough.

 5

When installed in ISP-100.

 6

When installed in ISP-100.

 7

Input samples longer than 20 bits are truncated to 20 bits.

 8

Least four significant bits are zero filled.

 9

DC to 20 kHz input, through sample rate converter, to output via passthrough.

 10

20 Hz to 20 kHz, -60 dB input, through sample rate converter, to output via passthrough.

 11

From input, through sample rate converter, to output via passthrough.

 12

From SDO0 pin on card connector, through transmitter, to output. The fractional-sample delay is inherent in the Crystal CS8404 transmitter.

 13

From input, through sample rate converter, to output via passthrough.

 14

Frequency is tripled by a PLL on the MDM-1 before being applied to the sample rate converter.

 15

Must be derived from MCLK+.

 16

Must be derived from MCLK+.

 17

Must be derived from MCLK+.

 18

Must be derived from MCLK+.

 19

Must be nominally 48 kHz when installed in ISP-100.

 20

From input to output via passthrough.

 21

From input to output via passthrough.

 22

When installed in ISP-100.

 23

DC to Fs/2.

 24

From input to output via passthrough.

 25

From input to output via passthrough.

 26

From input, through receiver, to SDI0 pin on card connector.

 27

From SDO0 pin on card connector, through transmitter, to output. The fractional-sample delay is inherent in the Crystal CS8404 transmitter.

 28

From input to output via passthrough.

 29

Must be Fs x 256.

 30

Must be derived from MCLK+.

 31

Must be derived from MCLK+.

 32

Must be derived from MCLK+.

 33

Must be derived from MCLK+.

Physical

Height

1.75 inches (44.5 mm)

Width

19.0 inches (483 mm)

Depth

14.5 inches+0.5” (368 mm + 12.7 mm) for protrusions

Weight

Approx.12.9 lbs. (5.9 kg)

Included Accessories

IEC power cord, user’s manual, software, spare fuse

Power

Universal AC input voltage
90-264 VAC; 50-60 Hz; 35 W Maximum
Internal Power Supply Sync. Frequency - 153.6 kHz