Telex Integrated Signal Processor ISP-100 - Manual (Page 59)

7-7
Using VUE-IT
Project Properties
Figure 7-11 Project properties dialog.
Project properties (see Figure 7-11) provides the user with information
on the name of the project, project location, and notes related to the
project. It is accessed by double clicking on the project name entry, or
by clicking on the project name entry and then clicking on the
Properties button in the Project Manager.
QuickMAP Selection
Figure 7-12 QuickMAP selection dialog.
QuickMAP Selection (see Figure 7-12) is where a project’s
QuickMAP is chosen. It appears when the Build From Script option
is selected when setting up a new project. Here you will be able to
select the script that will be used to create the QuickMAP. The
QuickMAPs can be sorted by Name, I/O Configuration, Creation Time,
and Modification Time. To sort the QuickMAPs, click on the heading
button of the property you wish to sort by (i.e. Name, I/O
A QuickMAP is a
signal processing
topology used with
an ISP-100. The
QuickMAP sets the
signal paths and
processing from
input to output. An
ISP-100 can hold one
QuickMAP at a time.