Telex Integrated Signal Processor ISP-100 - Manual (Page 29)

3-5
Troubleshooting
Caution: Use only the tool attached to the inside of the security cover to
change the battery. The tool is black anodized so it will not short out the
battery or anything else. DO NOT under any circumstance use pliers to
grip the battery. Doing so could cause damage. See Figure 3-3.
Replace the battery with a Renata CR2450N battery. Replacement
battery/module removal tools as well as replacement batteries are
available from Telex. Their part numbers are:
Battery/Module Removal Tool 40-04-052619
Replacement Battery 40-02-052055
Dispose of used battery promptly. Keep away from children. Do not
disassemble and do not dispose of in fire.
Denmark
Advarsel!
Lithiumbatteri. Eksplosionsfare ved feijlagtig handtering.
af samme fabrikat og type.
Lever det brugte batteri tilbage till leverandoren.
FINLAND
VAROITUS: Paristo voi rajahtaa, jos se on virheellisesti
asennettu. Vaihda paristo ainoastaan valmistajan
suosittelemaan tyyppun. Havita kaytetty paristo valmistajan
ohjeiden mukaisesti.
VARNING: Explosionsfara vid felaktigt batteribyte. Anvand
samma batterityp eller en eller en ekvivalent typ som
rekommenderas av tillverkaren. Kassera anvant batteri enligt
fabrikantens instruktion.
SWEDEN
VARNING:
Felaktigt batteribyte kan medfora fara for explosion. Anvand
darfor endast samma typ eller likvardig typ enligt
apparattillverkarens rekommendation.
Kassera forbrukade batterier enligt tillverkarens anvisning.
Saving the ISP-100
configuration data
to disk will guard
against the loss of
data in the event AC
power fails before a
failed battery has
been changed.