Telex Integrated Signal Processor ISP-100 User Manual
Page 83
8-13
Processing Components - Crossover
Two-way Linkwitz-Riley Crossovers
Linkwitz-Riley designs constitute a special, even-order in-phase
class of two-way sum-to-allpass response crossovers, and they
must be configured in accordance with very strict phase and
polarity requirements.
A properly implemented 2-way, 12 dB/octave Linkwitz-Riley
crossover is characterized by:
• 2
nd
-order Linkwitz-Riley (Butterworth-Squared) lowpass filter, -6
dB magnitude response at crossover frequency
• 2
nd
-order Linkwitz-Riley (Butterworth-Squared) highpass filter,
-6 dB magnitude response at crossover frequency
• polarity of highpass band opposite that of lowpass band
A properly implemented 2-way, 24 dB/octave Linkwitz-Riley
crossover is characterized by:
• 4
th
-order Linkwitz-Riley (Butterworth-Squared) lowpass filter, -6
dB magnitude response at crossover frequency
• 4
th
-order Linkwitz-Riley (Butterworth-Squared) highpass filter, -
6 dB magnitude response at crossover frequency
• polarity of highpass band the same as that of lowpass band
Summarizing: In a 2-way, 12 dB/octave Linkwitz-Riley crossover
the high band must be out-of-phase with the low band; in a 2-
way, 24 dB/octave Linkwitz-Riley crossover the high band must
be in-phase with the low band.
Three-Way Crossovers
Figure 8-5 Three-way crossover implementation.
In the ISP-100, 3-way crossovers are implemented as shown in
Figure 8-5.
This parallel structure was selected over the more common binary-
tree structure for its suitability to the distribution of filters among
multiple DSPs. The parallel structure is also capable of perfect