Telex Integrated Signal Processor ISP-100 User Manual
Page 47
5-5
Installing VUE-IT
Figure 5-8 ISP-100 not detected dialog.
If a dialog box like the one in Figure 5-8 appears in place of the one in
Figure 5-7, the cable connecting the computer to the ISP-100 should be
checked. If no problem is found there, try selecting a different serial port.
Figure 5-9 Communications error dialog.
If a dialog box similar to the one in the Figure 5-9 appears, then a serial
port that does not exist has been selected. Another serial port must be
selected.
You can change the serial port selection at any time by clicking on the
Option menu and selecting Configure.
If you continue to have problems please contact Technical Support. See
section 3 for contact information.