Telex Integrated Signal Processor ISP-100 - Manual (Page 68)

7-16
10 July 1998
Status Information
Figure 7-22 Digital I/O status panel.
Status information can be obtained for card slots 1 and 2 by
clicking on the Status button in the desired slot. See Figure
7-22.
Sample Rate Converter
On indicates that the sample rate conversion option is selected
on the card. The card cannot be selected as the clock master if
the SRC is turned on.
Off indicates that the sample rate conversion option is not
selected on the card.
Input Stream Format
Pro indicates that the digital receiver has detected an AES-EBU
formatted data stream.
Consumer indicates that the digital receiver has detected an
SPDIF formatted data stream.
Input Stream Emphasis
Emphasis indicates that the sending device has added emphasis
to the incoming data stream.
None indicates that the sending device has not emphasized the
incoming data stream.
Input Sample Rate
Indicates the sample rate of the data stream in kHz. There are
three possible frequencies 48.0 kHz, 44.1 kHz, and 32.0 kHz. All
other frequencies above and below these are listed as Out of
Range.
Note: The emphasis information in the output data stream will be
set to no emphasis, regardless of the input emphasis status.