Telex Integrated Signal Processor ISP-100 - Manual (Page 127)

B-1
Standard QuickMAPs
STANDARD QUICKMAPS™
VUE-IT ships with eighteen standard QuickMAPs. These mappings were designed to be flexible enough to be
applied in a wide variety of signal processing applications. This appendix provides drawings of the
QuickMAPs for reference purposes. The drawings begin on page B-2.
Identification of Slots and Connectors
The slots and connectors used are indicated by either the word IN in the case of an input or OUT in the case
of an output. In both cases the word IN or OUT is followed by a number (1-5) and a letter (A or B). The
number indicates the slot which is used and the letter indicates the connector used. For example: IN 1A
would indicate that it is an input using connector A of slot 1.
Applying QuickMAPs
When looking for a QuickMAP that fits your application it is important that you keep in mind that not all
portions of a QuickMAP must be used. It is possible to load a QuickMAP that requires more cards than you
have or need. The slots that do not contain cards may give an error indication (yellow flashing LED). As long
as the slots corresponsiding with the portion(s) of the QuickMAP you are using are filled there will not be a
problem.