Qualstar 501440 Rev. G User Manual
Tls fibre channel option, Installation and operation manual
Table of contents
Document Outline
- 1. Introduction
- 2. Unpacking
- 3. Product Description
- 4. FCO Type C Installation
- 4.1 Fibre Channel Option (FCO) Type C Installation Considerations
- 4.2 FCO Type C Interconnect Cabling
- 4.3 Cabling for TLS-42xx (using AIT-3 or 5 Tape Drives), TLS-44xx and TLS-46120 (using AIT-3 Tape Drives)
- 4.4 Cabling for TLS-8000 and 88xxx Libraries
- 4.5 Installing a Fibre Channel Option
- 4.6 Initializing the Fibre Channel Option
- 4.7 Configuring the Fibre Channel Loop ID
- 4.8 Configuring the Fibre Channel SCSI Devices Interface
- 5. FCO Type B Installation
- 5.1 Fibre Channel Option (FCO) Type B Installation Considerations
- 5.2 FCO Type B Interconnect Cabling
- 5.3 Cabling for TLS-44xxx Libraries with AIT-5 Tape Drives
- 5.4 Cabling for TLS-46xxx Libraries with AIT-5 Tape Drives
- 5.5 Cabling for TLS-412xxx Libraries with AIT-3 Tape Drives
- 5.6 Cabling for TLS-412xxx Libraries with up to six AIT-5 Tape Drives
- 5.7 Cabling for TLS-412xxx Libraries with up to twelve AIT-5 Tape Drives
- 5.8 Securing the Cables to the TLS
- 5.9 Initializing the Fibre Channel Option
- 5.10 Configuring the Fibre Channel Loop ID
- 5.11 Configuring the Fibre Channel SCSI Devices Interface
- 6. ATTO FCO Installation
- 6.1 ATTO Fibre Channel Option (FCO) Installation Considerations
- 6.2 ATTO FCO Interconnect Cabling
- 6.3 Cabling for TLS-44xxx Libraries with AIT-5 Tape Drives
- 6.4 Cabling for TLS-46xxx Libraries with AIT-5 Tape Drives
- 6.5 Cabling for TLS-412xxx Libraries with up to six AIT Tape Drives
- 6.6 Cabling for TLS-412xxx Libraries with up to twelve AIT Tape Drives
- 7. The Configuration Menu
- 7.1 Configuration Menu
- 7.2 Configuration\Advanced
- 7.3 Configuration\Advanced\Changer\Mechanics Menu
- 7.4 Configuration\Advanced\Fibre Channel (Left or Right) Menu
- 7.5 Configuration\Advanced\Fibre Channel (Left or Right)\Set TimeMenu
- 7.6 Configuration\Fibre Channel Menu
- 7.7 Configuration\Fibre Channel\Device (Left or Right) Menu
- 7.8 Configuration\Fibre Channel\Device (Left or Right) Menu
- 8. Maintenance Menu
- 8.1 Maintenance Menu
- 8.2 Maintenance\Fibre Channel Menu
- 8.3 Maintenance\Fibre Channel\Info (Left or Right) Status Screen
- 8.3.1 Backplane Id
- 8.3.2 Base Lvl
- 8.3.3 Board Rev
- 8.3.4 CPLD Rev
- 8.3.5 Memory (MB)
- 8.3.6 Daughtr Bd Id
- 8.3.7 FW Rev
- 8.3.8 Loader Rev
- 8.3.9 Prod. Id.
- 8.3.10 S/N
- 8.3.11 +2.5V (Type C FCO only)
- 8.3.12 +3.3V
- 8.3.13 +5V
- 8.3.14 +12V (Type B and C FCOs only)
- 8.3.15 Air Temp
- 8.3.16 CPU Temp (Type B and C FCOs only)
- 8.3.17 UPDATE
- 8.4 Maintenance\Fibre Channel\ Log (Left or Right) Status Screen
- 9. Repacking