Qualstar 501440 Rev. G - Manual (Page 36)

5.4 Cabling for TLS-46xxx Libraries with AIT-5 Tape Drives
Fibre Channel Cables
To Host or Switch
Drive 1
Drive 2
Drive 3
Drive 5
Drive 4
Drive 6
Terminators
FCO
Executive PCBA
SCSI Channel 0
SCSI Channel 1
Cable from
SCSI Channel 2
Figure 5-3 TLS-46xx Cabling Diagram using AIT-5 Tape Drives
Connectors on Rear of FCO Connectors on Rear of TLS-44xx
FCO: SCSI Channel 0 Medium Changer
Tape Drive 1 (T1)
Tape Drive 2 (T2)
FCO: SCSI Channel 1 Tape Drive 3 (T3)
Tape Drive 4 (T4)
FCO: SCSI Channel 2 Tape Drive 5 (T5)
Tape Drive 6 (T6)
FCO: SCSI Channel 3 through 6 None
FCO: Serial Jumper
Table 5-3 Preferred TLS-46xx Fibre Channel Option Cable Connections for AIT-5 Tape Drives
5-4
501440 Rev. J
FCO Type B Installation