Qualstar 501440 Rev. G - Manual (Page 44)

5.8 Securing the Cables to the TLS
Two adhesive backed cable tie mounts and hook and loop style cable ties are provided
to secure the interconnect cables to be secured to the rear of the TLS. Make sure to in-
sert the cable ties into the tie mounts before attaching the mounts to the library. See
Figure 5-8 for an example of the cables secured to the rear of the TLS.
Rear of TLS
Hook and Loop Cable Ties
and Cable Mounts
Interconnect Cables
Figure 5-8 Example of Cables Secured to the Rear of the TLS
5.9 Initializing the Fibre Channel Option
After attaching all of the interconnect cables from the Fibre Channel Option to the li-
brary, disconnect (if connected) the Fibre Channel Option from the FC host or Hub to
avoid affecting any operational systems.
NOTE
Refer to the applicable TLS Installation and Operation manual for instructions on using the TLS
Library and its menus.
Attach the power cord to the FCO and then push the power switch to the on position.
Apply power to the TLS library. During initialization, the library will reposition the
5-12
501440 Rev. J
FCO Type B Installation