Quantum ATL M-Series - Manual (Page 98)

Chapter 4 Performing Maintenance Operations
Cleaning a Tape Drive
80 ATL M-Series User’s Guide
Figure 42 Sample
Select Tape Drive
Screen
6 If the library is an ATL M1500 in a multiple library stack or an
ATL M2500, press the Level button to select the level where the
drive that requires cleaning is located.
7 Press Drive 1 or Drive 2 .
To cancel the operation, press Cancel .
8 Press Select .
The GUI displays the message Cleaning in progress . When the
cleaning is done, the GUI displays the Select Cleaning
Cartridge screen again.
9 Press Back to return to the Maintenance screen.