Figure 19 sample move cartridge from screen – Quantum ATL M-Series User Manual
Page 45
Chapter 2 Basic Operations
Moving Tape Cartridges
ATL M-Series User’s Guide
27
The GUI displays the
Move Cartridge FROM
screen (see
). A flashing arrow indicates the currently selected
source element.
Figure 19 Sample
Move Cartridge FROM
Screen
3
If the library is an ATL M1500 in a multiple library stack or an
ATL M2500, press the
Level
button to select the level where the
desired source element is located.
4
Press the
Up
and
Down
buttons to select the source element of
the cartridge.
5
When the flashing arrow is next to the desired source element,
press
Select
.