Configuring the mailbox – Quantum ATL M-Series User Manual
Page 55
Chapter 2 Basic Operations
Using the Mailbox
ATL M-Series User’s Guide
37
Configuring the
Mailbox
2
By default, the
Import/Export
option is set to
MAP
. To change this
setting:
1
On the main screen, press
Mailbox
.
The GUI displays the
Mailbox
screen (see
).
2
On the
Mailbox
screen, press
Config
.
The GUI displays the
Configuration
screen, with the
Import/
Export
option highlighted.
3
Use the
Up
and
Down
buttons to select the desired
Import/
Export
setting. The available settings are
None
,
1-Slot
,
10-Slot
(or
12-Slot
in LTO libraries), and
MAP
.
4
Press
Select
.
5
Press
Main
to return to the main screen.
Note:
The default setting is
MAP
. For more information
about these settings, see
Caution:
If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.
Note:
You must reboot the library before this setting will
take effect.