Table 5, Import/export settings – Quantum ATL M-Series User Manual
Page 88
Chapter 3 Changing the Library Configuration
Changing the Import/Export Setting
70
ATL M-Series User’s Guide
Table 5 Import/Export
Settings
Import/Export
Setting
Description
MAP
When manual access port (
MAP
) is selected, you can
use the first slot in the top left magazine to import
and export cartridges from the library. The host
views the MAP as a storage element; therefore, after
using the MAP to import a cartridge, you must
replace the data cartridge that was originally stored
there.
For information about importing and exporting
cartridges when
MAP
is selected, see
10-Slot
(or
12-Slot
in
LTO libraries)
When this setting is selected, all slots in the top left
magazine are configured as import/export elements.
They cannot be used for storage.
For more information about importing and exporting
cartridges when
10-Slot
(or
12-Slot
) is selected,
Importing Cartridges in 10-Slot or 12-Slot Mode
on page 34 and
Exporting Cartridges in 10-Slot or
1-Slot
When this setting is selected, the first slot in the top
left magazine is configured as an import/export
element. It cannot be used for storage.
For more information about importing and exporting
cartridges when
1-Slot
None
When this setting is selected, the top left magazine is
used as a 10- or 12-cartridge storage element and
behaves in exactly the same way as the other
magazines.