Quantum ATL M-Series - Manual (Page 81)

Chapter 3 Changing the Library Configuration
Changing the Short Labels Setting
ATL M-Series User’s Guide 63
Changing the Short Labels Setting
3
The Short Labels option controls how many bar code label
characters are returned when the host issues a Read Element
Status command. When Short Labels is set to:
• Off , all of the bar code label characters are returned
• On , only the first six characters of the bar code label are
returned
To enable or disable Short Labels :
1 Access the Configuration screen (see Accessing the
Configuration Screen on page 53).
2 Press the Up or Down buttons until Short Labels is highlighted.
3 Press Select .
4 Use the Up or Down buttons to select the desired Short Labels
setting. The available settings are Enabled and Disabled .
5 Press Select .
6 To return to the Configuration screen without changing the
option setting, press Cancel .
7 Press Main to return to the main screen.
Note: The default setting is Disabled .
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.