Quantum ATL M-Series - Manual (Page 85)

Chapter 3 Changing the Library Configuration
Changing the Baud Rate Setting
ATL M-Series User’s Guide 67
Changing the Baud Rate Setting
3
The Baud Rate option controls the baud rate setting of the serial
diagnostics port. You can set the baud rate to any standard rate
between 1200 baud and 38400 baud.
To set the
Baud Rate :
1 Access the Configuration screen (see Accessing the
Configuration Screen on page 53).
2 Press the Up or Down buttons until Baud Rate is highlighted.
3 Press Select .
4 Use the Up or Down buttons to select the desired Baud Rate
setting. The available settings are
38400
,
19200
,
9600
,
4800
,
2400 , and 1200 .
5 Press Select .
To return to the Configuration screen without changing the
option setting, press Cancel .
6 Press Main to return to the main screen.
Setting the Time
3
To set the time:
1 Access the Configuration screen (see Accessing the
Configuration Screen on page 53).
2 Press the Up or Down buttons until Time is highlighted.
3 Press Select .
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.